Lock History – The Oldest Lock

December 10, 2009 No Comments

In the Khorsabad Palace near Nineveh, archeologists found what is considered to be the oldest known lock. The archeologists estimated that the lock was 4,000 years old. This lock was a predecessor of a type of a pin tumbler lock. The lock worked by using a wooden bolt that secured a door and the bolt had a slot of several holes in the upper surface. With wooden pegs filling these holds, it prevented the bolt from being opened.

http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/digg_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/reddit_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/stumbleupon_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/delicious_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/technorati_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/myspace_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/facebook_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/yahoobuzz_32.png http://locksmithdenver.com/blog/wp-content/plugins/sociofluid/images/mixx_32.png
Educational

Leave a Reply

(required)

(required)


Ford 10 Cut Door Try-out Keys

If you own a set of the ford ten cut try out keys for the ford ignitions, you can...

Ford Trunk Lock

Like any Ford product, impressioning trunk keys for the ford Taurus can be difficult because of the bluntness of...

Ford Buzzer Activator

Any locksmith that does automotive lock work has probably had to do their share of Ford 5 pin style...

GM Code Tab Removing

Here is a really simple way to remove the code tabs from General Motors keys. Just grab the tab...

Ford Ignition Modification

I had to replace a 1991 Ford van ignition that had been damaged. It was 10:30 at night and...

GM Truck Lock Removal

I have found what I believe to be an easier way to remove, service and replace the door lock...

Airbag Check

Before servicing a VATS ignition, you should make sure that the airbag system is function properly. Checking the proper...

Using Tryout Keys

Although this may be old hat to some of your readers, there are probably a lot of younger locksmiths...

Homemade VATS Decoder

If you do not have VATS interrogator to help you generate a first key for that vats ignition that...

GM Sidebar Tip

This tip can save both time and money for a lock smith when it comes to defeating the sidebar...